Smoker:
-
Painted with high temperature black BBQ paint.
-
Reverse smoker design uses two plates to transfer smoke and heat.
-
7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.
-
Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from top, dead center, which also cuts down on the weight.
-
When a door is opened, heat remains in the pit.
-
Pit will hold a steady temperature all day long.
-
Grease drain
-
Roller bar steel handles and steel doorstops.
-
Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".
-
All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.
Temperature Gauges:
Firebox:
- 2-ft long and 2-ft wide by 1 1/2-ft tall.
- Insulated
- A flame deflector inside the tank stops flames from getting into the pit, allowing only that good old hickory smoke and heat inside.
- Breather for regulating temperature.
- Firebox top can also be used as a cooker for beans and sauces.
Smoke Stack:
Deluxe Charcoal Grill:
- 4' x 2' Cooking Surface
- Great for Burgers & Hot Dogs
- Double Doors for Easy Fire Starting & Clean Up
Six-Gallon Cajun Fryer:
-
Designed to never burn greas.
-
Three wire mesh baskets included
-
Drain valve for easy clean-up!
Stainless Steel LP Grill:
Workstation/Bar:
Temperature Control System:
Custom Star Burner:
Large Boiler Station:
LP Fire Starter:
-
High pressure burner welded into firebox.
-
High pressure needle valve.
-
This option makes getting your fire started a quick and simple task.
LP Plumbing:
-
20 PSI High Pressure Regulator
-
20, 30, 40lb tandem propane bottle rack.
-
Trailer plumbed with half-inch black pipe.
Stainless Steel Cabinet:
Utensil & Paper Towel Holders:
*Price based on layout, location, relevant concrete footing, delivery and installation. Please call for quote.