East Texas Smoker Company
Call Us at (903) 245-0039 
Smokin' Summer Deals, 10% Off between Now and August 31st!

We Fabricate High-Quality, Custom Smokers and BBQ Pits at an Affordable Price.

 

 

RK250 x 2 $7,150.00


Trailer:
• Brand new 6’ x 12’ tandem-axle trailer with 2000-lb jack.
• 3500-lb trailer axles and springs
• All new lights and wiring.
• All new 15-inch tires and custom chrome wheels.
• Well-weighted for towing.
• Spacious wood rack built out of 3/16" thick expanded metal and flat stock to hold more than enough wood for a long weekend.
• Plenty of room for coolers, storage, and hardware.

Double Smoker:
• Painted with high temperature black BBQ paint.

•Reverse smoker design uses two plates to transfer smoke and heat.
•Two-7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.

• Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from top, dead center, which also cuts down on the weight.
• When a door is opened, heat remains in the pit.
• Pit will hold a steady temperature all day long.
• Grease drain
• The axe handles on the top of the pit function as doorstops; they are a unique and sturdy feature.
• Pit is mounted well to the trailer, and components are fully welded.
• Four fully removable racks in each pipe for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".
• All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.

 

Firebox:
• 2-ft long and 2-ft wide by 1 1/2-ft tall.
• A flame deflector inside the tank stops flames from getting into the pit, allowing only that good old hickory smoke and heat inside. 
• Breather for regulating temperature.
• Fireboxes connected by 1/4-inch plate steel

• Top can also be used as a cooker for beans and sauces.

 

Smoke Stack:
• 6-inch x 28-inch smoke stack (schedule 40).
• Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the stainless steel spring handle.

 

Workstation/Bar:
• Varnished with industrial restaurant-quality stain.
• Plasti-koated to avoid contamination from raw meats and chicken; easily cleaned without damaging the wood..

 

Temperature Gauges:
• Constructed of stainless steel
• 2 1/2 inches in size
• Will gauge from 100 to 475 degrees.

 

Utensil & Paper Towel Holders:
• Keeps your utensils and paper towels handy.