Everyone you know is going to want you to cook for them on this rig!  

Trailer:

• Built to last!
• Brand new 6’ x 11’ single-axle trailer with 2000-lb jack.
• 3500-lb trailer axles and springs
• All new lights and wiring.
• All new 15-inch tires and wheels.
• Well-weighted for towing.
• Trailer painted color of your choice.
• Spare tire and spare tire carrier mounted underneath the tongue of trailer.

Smoker:

• Painted with high temperature black BBQ paint.
• Reverse smoker design uses two plates to transfer smoke and heat.
• 7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.
• Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from top, dead center, which also cuts down on the weight.
• When a door is opened, heat remains in the pit
• Pit will hold a steady temperature all day long.
• Grease drain
• The axe handles on the top of the pit function as doorstops; they are a unique and sturdy feature.
• Pit is mounted well to the trailer, and components are fully welded.
• Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".
• All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.

 Firebox:

• 2-ft long and 2-ft wide by 1 1/2-ft tall.
• A flame deflector inside the tank stops flames from getting into the pit, allowing only that good old hickory smoke and heat inside. 
• Breather for regulating temperature.
• All wooden handles mounted on 5/8-inch steel rods.
• Firebox top can also be used as a cooker for beans and sauces.

 Smoke Stack:

• 6-inch x 28-inch smoke stack (schedule 40).
• Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wood handle.

Workstation/Bar:

• Stainless Steel for easy clean-up
• In front of smoker and LP grill

 Roof and Fold out Awning:

• Keep your smoker, gear and self out of the elements.
• Roof constructed of steel frame and steel plate painted same color as trailer.
• Fold out awning on smoker side rolls completely in for travel.

 Flood Lights:

• Lights mounted under roof to keep work areas well lit.

Sinks and Holding Tanks:

• Double-basin stainless steel sink.
• 11-gallon Fresh water holding tank.
• 11-gallon grey water holding tank.
• Shur-Flo 12-volt water pump.
• RV water fill neck and water hose connect.
• Everything is plumbed and ready for you to get cooking!

Electrical System:

• 50-foot, 12 gauge extension cord.
• 2 – 110 volt outlets

 Custom Cutting Board:

• 3’ x 3’ x ¾” restaurant grade cutting board.
• Cutting board mounted to 36” full extension drawer sliders. Capacity 500 lb.

Temperature Gauges:

• Constructed of stainless steel
• 3 inches in size
• Will gauge from 50 to 550 degrees.

Custom Star Burners:

• Constructed of 3/16-inch plate steel for durability.
• Low pressure LP burner.
• High pressure needle valves.

Stainless Steel LP Grill:

• High-end Stainless Steel Grill
• Makes grilling fast and easy

 LP Fire Starter:

• High pressure burner welded into firebox.
• High pressure needle valve.
• This option makes getting your fire started a quick and simple task.

Trailer LP Plumbing:

• 20 PSI High Pressure Regulator
• 20, 30, 40lb tandem propane bottle rack.
• Trailer plumbed with half-inch black pipe.

State Park Grill:

• Extremely Versatile Charcoal Grill
• Constructed of 3/16" Plate for Long-Term Use

Storage Box:

• Lockable space under cutting board to keep everything you need securely in place.   

Utility Box:

• Five drawer utility box for utensils, spices and other gear.

Utensil & Paper Towel Holders:

• Keeps your utensils and paper towels handy.

Back to

CUSTOM SMOKERS