Trailer:
-
Built to last!
-
Brand new 6'10" x 16' tandem axle trailer
-
2000-lb jack
-
3500-lb trailer axles and springs with brake
-
All new lights and wiring
-
All new 15-inch tires and wheels
-
Well-weighted for towing
-
Spacious wood rack built out of 3/16" thick expanded metal and flat stock to hold more than enough wood for a long weekend.
-
Plenty of room for coolers, storage, and hardware
-
Smoker painted with high-temperature BBQ black paint
-
Custom trailer paint color of your choice
Smoker:
-
Reverse smoker design uses three plates to transfer smoke and heat.
-
10-ft, 350-gallon tank, 1/4 inch thick steel, 30 inches in height.
-
The three doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from the top, dead center, which also cuts down on the weight.
-
When a door is opened, heat remains in the pit.
-
The pit will hold a steady temperature all day long.
-
Grease drain
-
The cleavers on the top of the pit function as doorstops; they are a unique and sturdy feature. Ax handles are an alternate option.
-
The pit is mounted well to the trailer, and components are fully welded.
-
The pit has six fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".
-
All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.
Firebox:
-
2-ft long and 2-ft wide by 2-ft tall.
-
Breather for regulating temperature.
-
All wooden handles mounted on 5/8-inch steel rods.
-
Firebox top can also be used as a cooker for beans and sauces.
Large Warming Box:
-
2-ft x 2-ft x 3 ½-ft box built out of ¼-inch steel
-
5 grated, removable racks
-
Able to cook with smoke or without
Smokestack:
-
6-inch x 28-inch smokestack (schedule 40).
-
Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wooden handle.
Deluxe Charcoal Grill:
-
4’x 2’ cooking surface.
-
Great for burgers and hot dogs.
-
Double doors for easy fire starting and clean-up.
-
Baffle to control air flow.
Workstation/Bar:
Bar in front of Smoker-
-
Varnished with industrial restaurant-quality stain.
-
Plasti-coated to avoid contamination from raw meats and chicken; easily cleaned without damaging the wood.
-
If you choose to personalize your bar top, you must provide the sticker. It should be no larger than 10” tall x 96” long and looks best when it is die-cut vinyl.
-
Your pit will not include the Texas Tech stickers shown. These stickers are trademarked for the Texas Tech Meat Science Department, and may not be duplicated.
-
Feel free to send any sticker of your choice, and we will put it on the bar top.
Work Station-
-
Stainless steel workstation and prep area measure 36”x 60”.
Custom Cutting Board:
-
3’ x 4’ x ¾” restaurant grade cutting board.
-
Cutting board mounted to 36” full extension drawer slides. Capacity 500 lb. at full extension.
Sinks and Holding Tanks:
-
Double-basin stainless steel sink, and hand wash sink.
-
On-demand hot water tap.
-
15-gallon Freshwater holding tank.
-
15-gallon grey water holding tank.
-
Shur-Flo 12-volt water pump.
-
RV water fill neck and water hose connect.
12-Volt Electrical System:
-
12-volt deep cycle marine battery with case
-
AC/DC inverter to charge the battery and run 12-volt systems when plugged into 110-volt.
-
Everything on the trailer comes pre-wired, installed and ready to use.
110-Volt Electrical System:
-
50-foot, 12 gauge extension cord.
-
8 – 110-volt outlets
Temperature Gauges:
-
Constructed of stainless steel
-
3- inches in size
-
Will gauge from 50 to 550 degrees.
Temperature Control System:
-
LED Read-out thermostat
-
3 - 25 CFM Fans mounted to the firebox
-
This unit will keep the temperature consistent in your pit without lifting a finger.
-
Makes BBQ-ing a breeze
-
Our systems are custom designed for our pits.
Custom Star Burners:
-
Constructed of 3/16-inch plate steel for durability.
-
Low-pressure LP burner.
-
High-pressure needle valves.
LP Fire Starter:
-
High-pressure burner welded into the firebox.
-
High-pressure burner welded into deluxe charcoal grill.
-
High-pressure needle valve.
-
This option makes getting your fire started in either the charcoal grill or firebox a quick and simple task.
Trailer LP Plumbing:
-
20 PSI High-Pressure Regulator
-
20, 30, 40 lb tandem propane bottle rack.
-
Trailer plumbed with ½-inch black pipe.