top of page

Double Barrel Special BBQ Trailer


custom texas smoker bbq trailer
custom texas smoker bbq trailer
custom texas smoker bbq trailer
custom texas smoker bbq trailer
custom texas smoker bbq trailer


  • Built to last!

  • Brand new 13' x 83" tandem-axle trailer with 2000-lb jack.

  • 3500-lb trailer axles and springs

  • All new lights and wiring.

  • All new 15-inch custom aluminum wheels and tires.

  • Well-weighted for towing.

  • Spacious wood rack built out of 3/16" thick expanded metal and flat stock to hold more than enough wood for a long weekend.

  • Plenty of room for coolers, storage, and hardware.

  • Trailer painted color of your choice.

  • Spare tire and spare tire carrier.



  • Reverse smoker design uses two plates to transfer smoke and heat.

  • 7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.

  • Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down the from top, dead center, which also cuts down on the weight.

  • When a door is opened, heat remains in the pit.

  • Pit will hold a steady temperature all day long.

  • Grease drain

  • Metal stops and roller handles.

  • Pit is mounted well to the trailer, and components are fully welded.

  • Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".

  • All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.

  • Smoker painted with high temperature black BBQ paint.



  • 2-ft long and 2-ft wide by 1 1/2-ft tall.

  • Breather for regulating temperature.

  • Metal Spring handles mounted on 5/8-inch steel rods.

  • 1/2" plate steel inside firebox and door lined with 2" insulation 

  • 1/4" plate outside


Smoke Stack:

  • 6-inch x 28-inch smoke stack (schedule 40).

  • Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the spring handle.


Small Warming Box:

  • 2-ft x 2-ft x 2-ft box 

  • 4 grated, removable racks

  • Able to cook with smoke or without


“Double Barrel” Charcoal Grill:

  • 250-gallon tank

  • 7-feet long, 30-inches wide, 1/4-inch thick

  • Baffles to let in fresh air.

  • All racks are removable for easy cleaning.

  • Counterweight to open the extra-large door with ease.



  • Stainless Steel for longevity and easy cleaning

  • One in front of the smoker, and one in front of the charcoal grill.


Temperature Gauges:

  • Constructed of stainless steel

  • 3 inches in size

  • Will gauge from 50 to 550 degrees.


Custom Star Burners:

  • Constructed of 3/16-inch plate steel for durability.

  • Low-pressure LP burner.

  • High-pressure needle valves.


LP Fire Starter:

  • High-pressure burner welded into firebox.

  • High-pressure needle valve.

  • This option makes getting your fire started a quick and simple task.


Trailer LP Plumbing:

  • 20 PSI High-Pressure Regulator 

  • 20, 30, 40 lb tandem propane bottle rack.

  • Trailer plumbed with 1/2-inch black pipe.


Slide-out Cutting Board:

  • 5' cutting board mounted on full-extension industrial drawer sliders.

  • Weight capacity 500-lb.


Tool Box:

  • 37-inch x 2-foot x 18-inches deep 

  • Well constructed of aluminum. 

  • Lockable to keep your equipment secure.



bottom of page