Texas Cook Shack BBQ Concession Trailer
$28,900.08
Let us cusotm design a BBQ concession trailer to
fit your needs!
Trailer:
-
Custom Concession Trailer built to last!
-
Brand new 6'11" x 14’ tandem-axle trailer with 7000-lb jack.
-
5200-lb trailer axles and springs
-
All new lights and wiring.
-
All new 15-inch tires and wheels.
-
Well-weighted for towing.
-
Plenty of room for coolers, storage, and hardware.
Smoker:
-
Reverse smoker design uses two plates to transfer smoke and heat.
-
7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.
-
Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from the top, dead center, which also cuts down on the weight.
-
When a door is opened, heat remains in the pit.
-
Pit will hold a steady temperature all day long.
-
Grease drain
-
Metal stops and roller handles.
-
The pit is mounted well to the trailer, and components are fully welded.
-
Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".
-
All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.
-
Smoker painted with high-temperature black BBQ paint.
Insulated Firebox:
-
2-ft long and 2-ft wide by 1 1/2-ft tall.
-
1/4" plate steel lined with concrete insulation, enclosed by 1/4" plate steel
-
Keeps down on wood use
-
Cook in any weather without heat loss
-
Breather for regulating temperature.
-
Metal Spring handles mounted on 5/8-inch steel rods.
Smokestack:
-
6-inch smokestack (schedule 40) through the roof.
-
Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the spring handle.
Large Warming Box:
-
2-ft x 2-ft x 3 1/2-ft box built out of 1/4-inch steel
-
5 grated, removable racks
-
Able to cook with smoke or without
Temperature Gauges:
-
Constructed of stainless steel
-
3 inches in size
-
Will gauge from 50 to 550 degrees.
Custom Star Burners:
-
Constructed of 3/16-inch plate steel for durability.
-
Low-pressure LP burner.
-
High-pressure needle valves.
LP Fire Starter:
-
High-pressure burner welded into the firebox.
-
High-pressure needle valve.
-
This option makes getting your fire started a quick and simple task.
9-Gallon Fryer:
-
Designed to Never Burn Grease
-
Three-Wire Mesh Baskets Included
-
Drain Valve for Easy Clean Up
Trailer LP Plumbing:
-
20 PSI High-Pressure Regulator
-
20, 30, 40 lb tandem propane bottle rack.
-
BBQ concession trailer plumbed with 1/2-inch black pipe.
Roof and Enclosure:
-
Keep your smoker, gear, and self out of the elements.
-
Roof constructed of steel frame and steel plate painted the same color as the trailer.
-
Steel door access to the enclosure for prep, sinks and serving area.
-
Aluminum serving window measures 36" x 36".
Sinks and Holding Tanks:
-
Triple-basin stainless steel sink 20" x 40" x 10" depth.
-
Hand wash sink
-
15-gallon fresh water holding tank
-
20-gallon grey water holding tank
-
Shur-Flo 12-volt water pump
-
RV water fill neck and water hose connect
-
Everything is plumbed and ready for you to get going!
Hot Water Heater:
-
LP powered hot water
-
6 Gallon Tank
-
22 Gallons of continuous running hot water!
-
Clean up dishes and utensils on site
-
Meets requirements set by many Health Departments
110-Volt Electrical System:
-
50-foot, 12 gauge extension cord.
-
6 – 110-volt outlets
LED Lighting:
-
Four LED strip lights illuminate your work area
-
Powered by 110v or generator (not included)
Customize your BBQ concession trailer
We can add anything you want to the BBQ concession traier. And outit it with any of our accessories or custom paint.
We specialize in creating the perfect BBQ concession trailer for our customers needs. when your ready to design your cusotm BBQ concession trailer you can contact us via the website or contact Clint Shockey 903-245-0039 . The Best Custom BBQ concession trailer.