top of page

Paddy Wagon Custom Smoker Trailer
$70,027.50

Everything you need in a Custom Smoker Trailer.

Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer
Paddy Wagon Custom Smoker Trailer

Trailer:

  • Brand new 6’11" x 18’ tandem-axle trailer with 7000-lb jack.

  • 5200-lb trailer axles and springs

  • All new lights and wiring.

  • All new 15-inch tires and custom aluminum wheels.

  • Well-weighted for towing.

  • Spare tire and spare tire carrier mounted underneath the tongue of trailer.

  • Custom Smoker Trailer painted color of choice

  • Fold-down gate at rear for walk-in storage access

 

Smoker:

  • Painted with high temperature black BBQ paint.

  • Reverse smoker design uses two plates to transfer smoke and heat.

  • 7.5-ft, 250-gallon tank, 1/4-inch-thick steel, 30 inches in height.

  • Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from top, dead center, which also cuts down on the weight.

  • When a door is opened, heat remains in the pit.

  • Pit will hold a steady temperature all day long.

  • Grease drain

  • Pit is mounted well to the custom smoker trailer, and components are fully welded.

  • Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".

  • All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch-thick flat expanded metal was fitted and welded onto the frame.

 

Smoke Stack:

  • 6-inch x 28-inch smoke stack (schedule 40).

  • Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wood handle.

 

Workstation/Bar:

  • 72” x 12” x ¾” Stainless steel prep top in front of smoke chamber

 

Insulated Firebox:

  • 1/2" plate steel inner firebox, lined with 2” insulation, enclosed by 1/4" plate steel outer fire box

  • Up to 2 x wood burn times

  • Cook in any weather without heat loss

  • If you are looking to sleep or walk away for up to 6 hours, this is a MUST!

  • Baffle for regulating temperature.

  • All metal handles mounted on 5/8-inch steel rods.

 

LP Fire Starter:

  • High pressure burner welded into firebox.

  • High pressure needle valve.

  • This option makes getting your fire started a quick and simple task.

 

Large Warming Box:

  • 2-ft x 2-ft x 3 ½-ft box built out of ¼-inch steel

  • Four grated, removable racks

  • Able to cook with or without smoke

 

Deluxe-Adjustable Charcoal Grill:

  • 48” x 24”

  • Lightweight dome lid holds in heat

  • Santa-Maria style hand-crank wheel to roll the cooking rack up and down for adjusting the distance between food and coals

  • Double doors for easy ash removal and cleaning.

 

Temperature Gauges:

  • Constructed of stainless steel

  • 3 inches in size

  • Will gauge from 50 to 550 degrees.

 

36” Commercial LP Griddle:

  • Heavy Duty Stainless Steel, Manual Griddle

  • Corrosion resistant, 3/4" thick plate

  • Independent manual controls to save energy

  • Versatile cooking for any occasion!

  • Great for breakfast, burgers and much more!

 

Custom Star Burners:

  • Constructed of 3/16-inch plate steel for durability.

  • Low pressure LP burner.

  • High pressure needle valves.

 

2x 4-Gallon Fryers:

  • Stainless steel construction and drain valve for easy clean-up

  • Heats from the “inside out”, not the bottom with a V-shaped bottom to collect loose batter below the heat source to prevent scorching

  • Holds 4 gallons of oil

  • Two Stainless Wire Mesh Baskets with Cool-Touch Handles – 11-in x 5.5-in x 4.25-in

  • Fry Thermometer

  • High Pressure LPG Regulator with Brass Control Valve

 

Trailer LP Plumbing:

  • 20 PSI High Pressure Regulator

  • 20, 30, 40lb tandem propane bottle rack.

  • Custom smoker trailer plumbed with half-inch black pipe.

 

Roof:

  • Protect your custom smoker trailer and gear from the elements

  • Constructed using a steel frame and plate steel

  • 24” overhang at rear of custom smoker trailer

 

Metal Fold-Up Awnings:

  • Constructed of 12-gauge sheet metal welded to a square tubing metal frame

  • Awning connected to roof by multiple heavy-duty hinges, with separate lock down mechanism for each awning panel

  • Gas shocks lift awnings out and hold them in open position

 

12v Fold-up Sign on Roof:

  • 3' x 6’-Fold-up Sign

  • Make your presence known!

  • 12v Actuator powers sign to up and down with the push of a button

 

Under Roof Table Holder:

  • Holds up to five, 6' folding tables

  • Keeps tables stored within reach, but without taking up space on the trailer

 

2x Under-Roof Utility Box:

  • 24" x 36" lockable, steel toolboxes

  • One used to house electrical components and the other can store any other items that you want to keep securely locked up and out of the way

  • Welded into roof framing

 

TV Mount:

  • Full-extension swivel mount

  • Holds up to a 48" television (not included)

 

Wetsounds Sound System:

  • STX Micro-4 Amp

  • 2- ICON 8 tower speakers

  • Kicker AM/FM Marine Radio with Bluetooth

  • Fully wired and ready to rock

  • Includes 12v marine battery and AC/DC converter

 

4500w Onan Generator:

  • 4500 peak watts, 3700 running watts of power

  • All the power your custom smoker trailer needs

  • Digital inverter/remote start

  • Quiet running generator at 52 decibels

  • Dual Fuel, propane preferred to run off trailer LP system

 

LED Lighting:

  • LED Lights mounted to roof to light up your work areas on your custom smoker trailer

 

2x Roof mounted fans

 

Sinks and Holding Tanks:

  • 304-grade stainless steel, single basin sink.

  • 15-gallon Fresh water holding tank.

  • 18-gallon grey water holding tank.

  • Shur-Flo 12-v water pump.

  • RV water fill neck and water hose connect.

 

Hot Water Heater:

  • 6-gallon LP hot water heater

  • Provides 22 gallons of continuous hot water

 

Electrical System:

  • 50-foot, 12-gauge extension cord.

  • 8- 110-volt outlets throughout the custom smoker trailer

 

48” Work-top Refrigerator:

  • Provides 11.2 cu. ft. of storage for cold foods

  • Digital temp control

  • 304 stainless steel interior for easy cleaning

  • Self-closing doors

  • Door lock for travel

 

Slide-Out Cutting Board:

  • 5’ x 3’ x ¾” restaurant grade cutting board.

  • Cutting board mounted to 36” full extension drawer slides.

  • Capacity 500 lb.

  • Lockable storage below

5-Drawer Toolbox:

  • 5 slide-out drawers for keeping utensils and other necessities handy

  • Steel construction

  • Lockable for security

 

Utensil & Paper Towel Holders:

  • Keeps your utensils and paper towels handy.

 

Wrap:

  • Fully customized, professionally-designed wrap on awnings and fold-up sign to make your custom smoker trailer stand out

bottom of page