top of page

Category 5 Hurricane BBQ Trailer


Texas Custom Smoker Trailer
Texas Custom Smoker Trailer
Texas Custom Smoker Trailer
Texas Custom Smoker Trailer
Texas Custom Smoker Trailer


  • Built to last!

  • Brand new 6’11" x 20’ tandem-axle trailer with 14000-lb jack.

  • 7000-lb trailer axles and springs.

  • Trailer Brakes.

  • All new lights and wiring.

  • All new 15-inch tires and wheels.

  • Well-weighted for towing.

  • Painted any color of your choice using marine grade paint.



  • Two 12-ft smoking chambers, 1/4 inch thick steel, 40 inches in height.

  • Each chamber has three doors with 1-inch x 3/16-inch flat stock around the edges to seal up the pit

  • Reverse smoker design uses two plates to transfer smoke and heat.

  • Pit will hold a steady temperature all day long.

  • Each chamber has six fully removable racks for easy cleaning; bottom racks are roughly 6' x 39"; middle racks are 6' x 38"; top racks are 6' x 37".

  • All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.

  • Grease drain.

  • Painted with high temperature black BBQ paint.

  • The axes function as door handles; roller bar handles are an alternative option.

  • The pit is mounted well to the trailer, and components are fully welded.



  • Each firebox is 3-ft long and 3-ft wide by 2-ft tall.

  • A flame deflector inside the tank stops flames from getting into the pit, allowing only that good old hickory smoke and heat inside. 

  • Breather for regulating temperature.

  • All wooden handles mounted on 5/8-inch steel rods.


Warming boxes:

  • Each warming box is 3-ft x 3-ft x 3-ft.

  • Five grated, removable racks.

  • Able to cook with smoke or without.



  • 12-inch diameter smokestack (schedule 40).

  • Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wood handle.


Custom Temperature Control System:

  • 250 CFM fan for each firebox.

  • LED readout thermostat.

  • Keeps the pit at a constant temperature all day long.

  • Makes BBQ-ing a breeze!



  • Wooden bar top coated with durable plasti-coat to prevent damage to wood.


Temperature Gauges:

  • Constructed of stainless steel

  • 3 inches in size

  • Will gauge from 50 to 550 degrees.


LP Fire Starter:

  • High-pressure burner welded into each firebox.

  • High-pressure needle valve.

  • This option makes getting your fire started a quick and simple task.


Trailer LP Plumbing:

  • 20 PSI High-Pressure Regulator

  • 20, 30, 40 lb tandem propane bottle rack.

  • Trailer plumbed with half-inch black pipe.


Storage Box:

  • Extra large grated in storage box at front of the trailer.

  • Great for wood, coolers, chairs and all of your other gear.


Sinks and Holding Tanks:

  • Double-basin stainless steel sink.

  • 15-gallon Freshwater holding tank.

  • 15-gallon grey water holding tank.

  • Shur-Flo 12-volt water pump.

  • RV water fill neck and water hose connect.

  • Everything is plumbed and ready for you to get cooking!


Electrical System:

  • 50-foot, 12 gauge extension cord.

  • 2 – 110-volt outlets


Custom Cutting Board:

  • 5’ x 3’ x ¾” restaurant grade cutting board.

  • Cutting board mounted to 36” full extension drawer slides.

  • Capacity 500 lb.


Custom Star Burners:

  • Constructed of 3/16-inch plate steel for durability.

  • Low-pressure LP burner.

  • High-pressure needle valves.


Utensil & Paper Towel Holders:

  • Keeps your utensils and paper towels handy.

bottom of page