top of page

The Outdoorsman BBQ Trailer



  • Built to last!

  • Brand new 6’11" x 14’ tandem-axle trailer with 2000-lb jack.

  • Trailer Brake

  • 3500-lb trailer axles and springs

  • All new lights and wiring.

  • All new 15-inch tires and chrome wheels.

  • Well-weighted for towing.

  • Spare tire and spare tire carrier mounted underneath the tongue of the trailer.


Custom Paint:

  • Custom camouflage paint covering entire smoker and trailer.

  • 1200* engine paint to ensure longevity



  • Reverse smoker design uses two plates to transfer smoke and heat.

  • 7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.

  • Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from the top, dead center, which also cuts down on the weight.

  • When a door is opened, heat remains in the pit.

  • Pit will hold a steady temperature all day long.

  • Grease drain

  • Roller bar handles and steel doorstop. (Ax handle option available)

  • Pit is mounted well to the trailer, and components are fully welded.

  • Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".

  • All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.



  • 2-ft long and 2-ft wide by 1 1/2-ft tall.

  • Firebox insulated using 1 3/8" firebricks

  • Breather for regulating temperature.

  • All wooden handles mounted on 5/8-inch steel rods.


Small Warming Box:

  • 2-ft x 2-ft x 2 1/2-ft box built out of ¼-inch steel

  • Four grated, removable racks



  • 6-inch x 28-inch smokestack (schedule 40).

  • Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wood handles



  • Stainless Steel bar top for easy cleanup.


 Sinks and Holding Tanks:

  • Double-basin stainless steel sink.

  • 15-gallon Freshwater holding tank.

  • 15-gallon grey water holding tank.

  • Shur-Flo 12-volt water pump.

  • RV water fill neck and water hose connect.

  • Everything is plumbed and ready for you to get cooking!


 Hot Water Heater:

  • 6-gallon LP hot water heater

  • Provides 22 gallons of continuous hot water


Electrical System:

  • 50-foot, 12 gauge extension cord.

  • 2 – 110-volt outlets

  • 12 v battery tender wired into the electrical system


Custom Cutting Board:

  • 3’ x 3’ x ¾” restaurant grade cutting board.

  • Cutting board mounted to 36” full extension drawer slides.

  • Capacity 500 lb.

  • Lockable space under the cutting board to keep everything you need securely in place. 


Temperature Gauges:

  • Constructed of stainless steel

  • 3 inches in size

  • Will gauge from 50 to 550 degrees.


Custom Star Burners:

  • Constructed of 3/16-inch plate steel for durability.

  • Low-pressure LP burner.

  • High-pressure needle valves.


LP Fire Starter:

  • High-pressure burner welded into firebox.

  • High-pressure needle valve.

  • This option makes getting your fire started a quick and simple task.


Trailer LP Plumbing:

  • 20 PSI High Pressure Regulator

  • 20, 30, 40 lb tandem propane bottle rack.

  • Trailer plumbed with half-inch black pipe.


 Utensil & Paper Towel Holders:

  • Keeps your utensils and paper towels handy.

bottom of page