top of page

Silver Bullet BBQ Trailer

$20,968.80

Texas Custom Smoker Trailer
Texas Custom Smoker Trailer
Texas Custom Smoker Trailer
Texas Custom Smoker Trailer
Texas Custom Smoker Trailer

Trailer:

  • Brand new 6’ x 12’ tandem-axle trailer

  • Constructed from 2" x 2" square tubing

  • 3/16" plate floor and barrier walls.3500-lb trailer axles and springs.

  • Trailer brake with 7-way plug and emergency breakaway kit.

  • Retractable rack.All new LED lights and wiring. All new 15-inch tires and chrome wheels. Well-weighted for towing.

  • Diamond plate steel fenders

  • The entire outside of trailer is sheeted in 16 gauge 304 commercial grade stainless steel.

  • Trailer frame and smoke chamber powder coated the same color of your choice.

 

Smoker:

  • Reverse smoker design uses two plates to transfer smoke and heat.

  • 7.5-ft, 250-gallon tank, 1/4 inch thick steel, 30 inches in height.

  • Doors have 1-inch x 3/16-inch flat stock around the edges to seal up the pit; no counterweights are needed because they were cut 8" down from the top, dead center, which also cuts down on the weight.

  • When a door is opened, heat remains in the pit.

  • Pit will hold a steady temperature all day long.

  • Grease drain

  • The ax handles on the top of the pit function as doorstops; they are a unique and sturdy feature.

  • The pit is mounted well to the trailer, and components are fully welded.

  • Four fully removable racks for easy cleaning; bottom racks are roughly 30" x 29"; top racks are 30" x 26".

  • All cooking surfaces in the pit and firebox are framed with 1-inch by 1-inch square tubing; 3/16-inch thick flat expanded metal was fitted and welded onto the frame.

 

Firebox:

  • 2-ft long and 2-ft wide by 1 1/2-ft tall.

  • Insulated with insulation. 

  • Baffle for regulating temperature.

  • All wooden handles mounted on 5/8-inch steel rods.

 

 Smokestack:

  • 6-inch x 28-inch smokestack (schedule 40).

  • Cooling baffle makes it extremely easy to control the temperature by pushing or pulling the wood handle.

 

Bar:

  • Stainless steel bar top

 

Work Station:

  • 7' x 15" fold-out stainless steel prep area.

  • Folds away into inner sidewall of the trailer for storage without taking up extra storage space.

 

 Custom Cutting Board:

  • 3’ x 3’ x ¾” restaurant grade cutting board.

  • Cutting board mounted to 36” full extension drawer slides.

  • Capacity 500 lb.

 

 Custom Star Burners:

  • Star burners, like everything on this pit, have been flush fit to the trailer.

  • Built out of heavy-duty 1/4" plate with 1-1/2" x 3/16" flat stock fully welded pot rests.

  • 2- 100,000 BTU Low-pressure burners coupled with a high-pressure 15 PSI regulator.

  • Flame has the capability to range from very low to extremely high.

 

 Temperature Gauges:

  • Constructed of stainless steel

  • 3 inches in size

  • Will gauge from 50 to 550 degrees.

 

 Trailer LP Plumbing:

  • 20 PSI high-pressure Regulator

  • 20, 30, 40 lb tandem propane bottle rack. Trailer plumbed with half-inch black pipe and copper tubing.

  • LP Quick disconnect at the rear of trailer for weed burner/fire starter.

 

 Storage Box:

  • Lockable space under the cutting board to keep everything you need securely in place.   

 

 Utensil & Paper Towel Holders:

  •  Keeps your utensils and paper towels handy.

Texas Custom Smoker Trailer
bottom of page